Your Cart

×
Your cart is currently empty.

Ships in one week
Ships in one week

Subtotal

Setting Up Your Brilliant Smart Home: 3-Switch Control (Load Side) + 1 Dimmer Switch

These instructions are for users who have had their device installed in their home by a professional. 

 This setup should take roughly 15 - 20 minutes to complete. 

TIP
: We recommend visiting this page using a computer or tablet because you will need to use your phone to complete setup using the Brilliant mobile app.

If you have any questions during setup or run into any issues, please visit our Brilliant support website or contact us by phone at +1 (855) 650-0940 or by email at support@brilliant.tech.

 

1. Set up your home internet. Brilliant requires a 2.4Ghz Wi-Fi network.

     

    2. Connect your Brilliant Control to your 2.4Ghz Wi-Fi network.


    From the Brilliant home screen shown below, go to Settings (gear icon in top right) > “Connectivity”.

      settings cog in upper right hand corner of control screen 

       

      3. Download the “Brilliant Smart Home System” app (iOS and Android)

        brilliant mobile app icons 

        4. Sign Up & Create a Home

        Use the Brilliant app to sign up and create an account. 

        5. Login and Add [Install] your Brilliant device to your home

        After you create your account, you will need to log into your home.

        When you see the screen titled “Need help Installing?”, select YES (or select “Install a Brilliant”)

           

          6. Use your Mobile App to name each of your Brilliant devices

          Now you will go through the steps to add your Brilliant device to your mobile app. To start setting up your Brilliant system, enter the answers bolded below when you encounter the following screens and questions:

           Note: Names of Lights and Devices can be re-named at a later time for your personal preference. 

          Add your 2-Switch Control to your Mobile App and name each of your sliders

          • “Select Brilliant” screen
            • Select 3-Switch Control
            • "Add 3-Switch Control" Screen
            • Select a Room: Kitchen 
            • Device Name: Kitchen Control 
            • Assign Load: Add light
              • Choose Fixture Type: Standard Light
              • How many switches control this light: 2
              • Add Light” pop-up screen series
              • Light Name: Kitchen Lights
              • Light Type: LED
              • Light Name: Kitchen Light
              • Light Fixture Wattage: 10W - 150W
              • Do you want to dim this light: YES
              • Do you know what this switch type is: LOAD

          Configure your 2nd Slider: 

          • "Add 3-Switch Control" Screen
            • Select Slider 2 or Next Slider

              • Add Light 
                • Choose Fixture Type: Standard Light
                • How many switches control this light: 1
                • Name this light: Kitchen Light Middle
                • Select Light Type: LED
                • Select Wattage: 10W - 150W
                • Do you want to dim this light: Yes
           

          Configure your 3rd Slider: 

          • Select Slider 3 or Next Slider
            • Add Light
              • Choose Fixture Type: Standard Light
              • How many switches control this light: 1
              • Name this light: Kitchen Light Right
              • Select Light Type: LED
              • Select Wattage: 10W - 150W
              • Do you want to dim this light: Yes

          Add your Smart Dimmer Switch to your mobile app to finish your configuration setup. 

          • “Installations” screen
            • Select + Add Device
          • “Select a Brilliant Device” screen
            • Select Smart Dimmer Switch
          • “Add a Smart Dimmer Switch” screen
            • Device Name: Kitchen Dimmer Switch
            • Room for this device: Kitchen
              The assigned load and switch type will be pre-filled for you
          • “Installations” screen
            • Select READY TO INSTALL
            • Select START
          • “Installation Guide” screen
            • Are your Kitchen Control, Kitchen Switch all wired into your wall: YES

            7. Scan The QR Codes

            Connect your Brilliant devices by following the instructions in your Brilliant App and on your Brilliant Control to complete your Brilliant system setup.

             NOTE: If you would like to re-name or change settings of any of your Brilliant devices, you can do so in the Device Settings of Your Mobile App.

            8. Add Other Smart Home Integrations to Brilliant  

            To add smart home devices to control with your Brilliant system, like the Honeywell Home Thermostat and Kwikset Halo Lock installed in your home, you will need to create accounts for these devices and connect them to your 2.4Ghz Wi-Fi network before you can add them to your Brilliant System. For help, watch “How to add an integration”.